Quote:
Originally posted by BillA:
Joe,
Are your ignorant pronouncements any better reading 1 month later ?
Are you going to appologize to those that you helped sucker into buying a poor performing radiator ?
Or just tell them to limit themselves to 30W non TEC applications ?
Because it WAS perfectly OBVIOUS.
Except of course to sales people for 4in stacked plate oil coolers.
Or to those unable to objectively evaluate products made or sold by their friends.
A "technical" site is only as good as the accuracy of the technical advice proffered.
|
Let´s just say this. I´ve borrowed two of those 4inch radiators and they kick ass!! They can easily handle 150W heatload.
I also got an 11x5-1/2 nich version of the same type and it kept my water at a maximum of 2c above ambient temp with 170W heatload (120W tec @ 14.7V and Celeron 667@1050, 2.0V) using dual Sunon 84CFM 120mm fans.
These stacked plate radiators ARE extremely good and any who says they´re not simply haven´t tried them in a computer watercooler or isn´t satisfied with the performance that can be had using radiators.
/Erik