Quote:
Originally posted by bigben2k
Hum, actually I tossed out the mod to the top that I dreamed up. All I need on the top is the openings for the outlet, but I also need that nozzle, which is a 5/8" plug, 1/2" thick, where the opening is 1/4", but has a cross in the middle of it that's 1.5 mm wide.
That cross is going to have rounded corners, to match the cross in the copper base. By "rounded corners", I mean where the fins intersect, since the channel would be cut using the same endmill.
See what I mean?
[edit] In polycarbonate, of course, which I would send you.
|
What that green thing is and what you speak of here doesn't match up. On the green pick there is nothing but a hole in the middle. Are you saying there is going to be a modification to that hole?
I am not so sure I would be any better to do this than Fixitt. He will have the actual block and be able to match things up. It is hard to make a top as perfect as it can get without having what it is going to. Might be worth asking Fixitt to do the top aswell. If for some reason the base needs minor adjusting then he can transfer that right over to the top without much hastle. Either way though I or Fixitt will need a dxf of the top and all the measurments and depths of everything. I will then have to redraw it to work with my mill and also make several different drawings for each step.