Pro/Forums - View Single Post

saton472 · 04-02-2003, 08:42 AM

Im planning on using a sheet of luan cut to the size of the fins for spacing. im going to have a piece in between each piece when cutting the holes. then befor i put the fins on I will cut the sheets of luan along the holes. Then ill put the sheets of luan back inbetween each fin. then i put the pipes throug the holes and then pullout the luan. that why ill get evan spacing without the fins Bending.

04-02-2003, 08:42 AM	#33
saton472 Cooling Neophyte Join Date: Feb 2003 Location: Virginia, USA Posts: 57	Im planning on using a sheet of luan cut to the size of the fins for spacing. im going to have a piece in between each piece when cutting the holes. then befor i put the fins on I will cut the sheets of luan along the holes. Then ill put the sheets of luan back inbetween each fin. then i put the pipes throug the holes and then pullout the luan. that why ill get evan spacing without the fins Bending. __________________ Live and learn. Then get a Dremel.