Pro/Forums - View Single Post - Finally... the monster i have created is now compteted

Spamz0r · 04-09-2003, 07:39 AM

yeah, the design was originall meant to be 1mm fins with 3mm gaps, but the 3mm bit started moving in the end mill while milling...

the middle fin is 8mm high the outer ones i *think are 6mm

as for wasted space, dont forget i was using a 6mm bit so, the only space really would have been above the fins, even then it should be less as some of the water might not be going through the fins.... just straight to the other exit holes

food for thought :/

oh btw the base is 3mm thick so i can still add some like groves around the CPU core area for more surface area, if the temps arnt upto what i think is good

04-09-2003, 07:39 AM	#7
Spamz0r Cooling Neophyte Join Date: Feb 2003 Location: Brisbane Austrailia (or where my computer is) Posts: 86	yeah, the design was originall meant to be 1mm fins with 3mm gaps, but the 3mm bit started moving in the end mill while milling... the middle fin is 8mm high the outer ones i think are 6mm as for wasted space, dont forget i was using a 6mm bit so, the only space really would have been above the fins, even then it should be less as some of the water might not be going through the fins.... just straight to the other exit holes food for thought :/ oh btw the base is 3mm thick so i can still add some like groves around the CPU core area for more surface area, if the temps arnt upto what i think is good __________________ [1700+ (1466MHz 1.5v @ 1983MHz 1.975v) 2400+] - [SLK-800 w/50cfm Sunnon] - [Epox 8RDA+] - [256Mb Kingmax PC2100 & 256Mb Crucail PC2100 @ 2:2:2:5:2] - [ GF4 Leadtek 4200 (250/513 @ 300/600)] - [ 12851 3d2001SE] Hardware :: Modding :: Cooling :: Software :: Games :: Reviews :: Forums :: All* at PlanetModz