Geil = OCZ = teh sucks.
Try this: install the latest BIOS on your board. Set your CPU voltage to 1.75, your DDR voltage to 2.9, and your AGP voltage to default. Set your multiplier to 11 (default) on AGGRESSIVE settings, and your FSB at 166. Then set your timings (if good PC2700 or higher) to 2-2-2-6. Once done, save and reboot. If it barfs, you have a sux chip. If not, bump your timings to 2-3-3-7 and start raising the FSB by 2 and save, reboot, and keep doing it until you hit a wall. Doing the math, adjust your multiplier until it comes out to more than 25 less than your current Mhz at crash at 166 FSB, then repeat the process. Once done, start lowering your timings until you crash. Then set everything just a tad bit higher, raise your CPUV to 1.775, and you're all set.
Got it?
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied
|