the chip is as follows..
AXDA1700DLT3C xxxxxxx 260084
JIUHB 0308RPMW
that is everything off of the chip..
im aiming for 2ghz with a 200fsb.. if anything more is left and is able.. i will be doing that too..
im going to TRY a spanner fan that my girl friends pc has and so does her son.. if the fan doesnt cool very well (im not sure for what reason) but if not, i will try a faster fan or something completely different.. the fan has a copper plate at the bottom and is keeping my other px1800's @ 1.75v @ no more than 40c under full load..
__________________
NF7-S Rev 2
XP1700 @ 2.45ghz (11.5x213fsb) @ 1.8vcore (bios setting)
Memory timings at cas 2 2-2-6 @ 2.7Vdimm (memory divider set to 3/3)
IBM Deskstar 80gig ata100 hard drive
Pioneer dvd-rom/dvd-rw
Xaser 2 case modded with 120mm side fan
Thermalright SLK-900U + 92mmm Tornado fan
Vantec 205SL Fan controller (controlling the 120mm fan and Tornado)
Enermax 460W PSU
Geforce 3 Ti 200 64mb
|