yup its a pally heres how I did mine
1400mhz 1.75v 63watts
35, 24.0----------------------11
1750mhz 1.8v 83watts
38-39c, 24.2 -----------------14.3
1818mhz 1.85v 91watts
40 24.2----------------------15.7
1848mhz 2v 109watts
44, 25.0----------------------19
the numbers on the side were the delta between water and cpu, then I took the wattages, at different speeds. I plotted them in xstat and ystat on my ti86, then I made a linear regression model and checked out the graph and the table. at 0, it should line up with 0, make sure you have it correctly, at first i thought my temps were off by 3c, but it turns out I had the numbers flipped around.
put the delta in the xstat and the watts in the ystat, then go linR xstat, ystat and hit enter
If you want, I can do the calculations for you, just sent me the numbers at at least 3 different wattages....
Jon
|