Quote:
Originally posted by LiquidRulez
You sure those spindle bearings can take it?
Better look into it before you have to replace them and possibly the spindle to boot.
Reidtools has some pretty decent prices on bearings if you need to replace em.
Id replace em' to begin with just to be sure, because more than likely ,sherlines are not rated to take such a high RPM in the spindle.
Dont know about you Jaydee, but Id be lost without my mills!!
|
Yes, they are rated at 25,000RPM. The pully is from Sherline designed spacifically for my mill.
