[jaydee]

Originally posted by Someone
as for acurate, I mean by +/-1c wich is really good. I use an 8k3a with the on die probe, air probe, and water probe, I graphed and made a linear regression modle to see that my ondie probe is only .1c off.

Originally posted by Someone
yup its a pally heres how I did mine

1400mhz 1.75v 63watts

35, 24.0----------------------11

1750mhz 1.8v 83watts

38-39c, 24.2 -----------------14.3

1818mhz 1.85v 91watts

40 24.2----------------------15.7

1848mhz 2v 109watts

44, 25.0----------------------19

the numbers on the side were the delta between water and cpu, then I took the wattages, at different speeds. I plotted them in xstat and ystat on my ti86, then I made a linear regression model and checked out the graph and the table. at 0, it should line up with 0, make sure you have it correctly, at first i thought my temps were off by 3c, but it turns out I had the numbers flipped around.

put the delta in the xstat and the watts in the ystat, then go linR xstat, ystat and hit enter