Quote:
Originally posted by bigben2k
Here's a compilation of the known information:
Nozzle width: 3mm
# of channels: 8
# of fins: 7
Width of channels: 1.0 mm
Width of fins: 1.0 mm
Depth of fins: 4.0 mm
Fin length: up to 30mm (as long as it runs at least 2.0 mm past the core, it's good)
Baseplate thickness: "less than 1.0 mm"
|
Thanks to you to  that was very good information...
__________________
||XP1700+ T-bred @ 2000 mhz || Inno3D Geforce 4 ti 4200 128 mb|| IBM 120 GXP 80 gb 7200 rpm|| Spire cpu-cooler idle: 35 grader full: 45 typ...
|