I am going to get a Lian Li so i wont need this anymore
I have a modded Enlight 8950 Server Case
http://enlightcorp.com/server_cases/8950_server.shtml
I dont use the wheels cause 1 is broken
has 2 blowholes on top ( push up against most full size drives so i
dont put anything there. but a Live drive would fit perfect) 2 slots
for fans on the back and 3 holes on the side with a window.
It will come with no Powersupply since that is my enermax for my new
system.
I will leave all fans except for the top 2 (and still may leave those
just not sure yet
the Powersupply slot is tricky but a Enlight PS will fit no problem ,
but the enermax i had to flip the rear panel and also not screw it in
all the way.
pictures
pic of side case. the small piece cut off in the corner was made for a
LCD serial port
http://www.angelfire.com/or/KCDMS/images/8950_001.gif
top view
http://www.angelfire.com/or/KCDMS/images/8950_002.gif
looking up to top
http://www.angelfire.com/or/KCDMS/images/8950_003.gif
I also have a 7237 that i cut to allow 2 80mm fans on the back (have
yet to see if it works) that i will include for 30 bucks if interested
if you get the 8950 and I will include a 250w PS
back side of case where holes are
http://www.angelfire.com/or/KCDMS/im...nlight_001.gif
in the upper left corner you can see the metal is partially bent
http://www.angelfire.com/or/KCDMS/im...nlight_002.gif
nother of the back side
http://www.angelfire.com/or/KCDMS/im...nlight_003.gif
last one from the back
http://www.angelfire.com/or/KCDMS/im...nlight_004.gif
110.00 for both cases if you pick them up
the 8950 has a total of 5 extra fans in it and 5 fan guards while the
7237 does not have any fans
8950 retails for 150.00 without PS
let me know