[Sproket]

Well I can say that I had this happen 2 weeks ago to me. Exactly the same thing but worse.

For one the Dye I got from Directron.com SUX's!

I bought some green from Dtekcustoms and let me tell you what a difference!!

First off I was using Tygon and it has some way of absorbing impurities. My tubing turned light brown then light red, then totally Pink! I was only using green dye and distilled water. But the dye I had, i had to use 1/4 of the bottle to make it glow.

Now Im using Clearflex and dtek dye and only had to add 3/4 of a 1cc, I used a straw and it was about 3/4 of an inch of dye in straw. Wow that stuff is strong and glow very good w/ clearflex 60.

I think Clearflex is better than Tygon!

I took apart the Whitewater block and put it in Vinger for a day and also the Rad. Had stuff all cake in there. Maybe something was left in the Rad from the beginnning! I rinsed the Rad the first time before using. But Vinger pulled all types of stuff out.

It has been 2 days now since new setup and everything is much better than before. Let see how it goes. If it makes it a week then I will know.

The funny thing is when my Tygon turn all those colors then finally Pink, I mean a dark pink w/ build up the T connector had Nothing in it, and the Y connector was clean also. Hmmmmmmm.