Pro/Forums - View Single Post - Yo-Duh_87's PSU Load Splitting goodies

bigben2k · 05-06-2003, 07:56 AM

The fix is for preventing the PSUs from charging each other.

The fix is also documented on the IRF website, but it's for another purpose.

If you don't believe it will work, then tell me why. Otherwise, I'll confirm it with my almost complete circuit, and let you know, OK?

Note: the fix only applies to the 1404 MOSFET: I haven't checked to see if it's ok for the 1407, yet.

05-06-2003, 07:56 AM	#12
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	The fix is for preventing the PSUs from charging each other. The fix is also documented on the IRF website, but it's for another purpose. If you don't believe it will work, then tell me why. Otherwise, I'll confirm it with my almost complete circuit, and let you know, OK? Note: the fix only applies to the 1404 MOSFET: I haven't checked to see if it's ok for the 1407, yet. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101 Last edited by bigben2k; 05-06-2003 at 08:03 AM.