Thread: Repairing Holes
View Single Post
Unread 05-09-2003, 03:50 PM   #4
Cova
Cooling Savant
 
Cova's Avatar
 
Join Date: May 2002
Location: Canada
Posts: 247
Default

It'll look nasty from the inside of the case, but glue something stiff over the hole on the inside, then on the outside fill it in with some sort of putty/bondo/something mixture. Then sand smooth, paint, etc.

If you need it to look good inside and out, you better find a good welder.
Cova is offline   Reply With Quote