yes it tested on a p4.
i am using on old p4 1.7 and it's giving me stable temp readings but i do find it intersting that the maze 3 , fin style base and this dimple block all give results within 1C of each other with
idle temps of 28 - 28.5 and load temps of 30-31.5
room temp of 20-20.5.
probe temps are 21.6 idle and 23-24 load.
i do have a amd board with a 1.1 athalon but due to a leak on one of my test blocks it suffers from randome lockups.
My main rig is p4 and once i have a block i am happy with it will be installed in the p4 rig.
|