Pro/Forums - View Single Post

shiltz · 05-19-2003, 12:50 PM

I ran into the same issue with my system with mounting too, when I first booted it up after getting everything installed one of my CPU's war running at 19C, the other was 38C, I took it off, remounted it, tried again, same thing, found out I cut my tube running from the 1st to 2nd CPU to long and when I put the side panel on it pushed it the wrong way causing the block to not sit properly.

05-19-2003, 12:50 PM	#2
shiltz Cooling Neophyte Join Date: Nov 2002 Location: usa Posts: 84	I ran into the same issue with my system with mounting too, when I first booted it up after getting everything installed one of my CPU's war running at 19C, the other was 38C, I took it off, remounted it, tried again, same thing, found out I cut my tube running from the 1st to 2nd CPU to long and when I put the side panel on it pushed it the wrong way causing the block to not sit properly. __________________ Athlon 64 3000+ Venice / Asus A8N-SLI Premium / 2X Corsair XMS 512mb PC3200 BFG 7800GTX / Audigy 2 / Dell FP2001 20.1" / Antec TruePower 2.0 TPII-550 WD Raptor 36.7GB / WD Raptor 74GB / Maxtor 120GB SATA Water Cooled: CPU Swiftech Storm / GPU Maze 4 / Danger Den Double Heater core / Eheim 1250