Pro/Forums - View Single Post

GTA · 05-20-2003, 07:05 PM

The block itself, or at leat the part that does the cooling, is 46x46mm.

It works on CPU's, GPUs and NBs.

I just need the mounting specs to make it work. Have got a CPU prototype finished, but its 300 miles away at present, should be finally delivered on Thursday/Friday

I like Fixxits idea, if I used washers, and instead of holes, had grooves/slots, at say 80mm and 56mm apart, then it should fit most cards, and once clampted tight enough, be in very little danger of slipping.

The problem is finding the cards to look at, I can't go out and buy each card, and I don't know anyone else who uses top end kit, and might let me do some measuring.

Any other ideas/specs?

05-20-2003, 07:05 PM	#4
GTA Cooling Savant Join Date: Mar 2003 Location: UK - Bristol Posts: 134	The block itself, or at leat the part that does the cooling, is 46x46mm. It works on CPU's, GPUs and NBs. I just need the mounting specs to make it work. Have got a CPU prototype finished, but its 300 miles away at present, should be finally delivered on Thursday/Friday I like Fixxits idea, if I used washers, and instead of holes, had grooves/slots, at say 80mm and 56mm apart, then it should fit most cards, and once clampted tight enough, be in very little danger of slipping. The problem is finding the cards to look at, I can't go out and buy each card, and I don't know anyone else who uses top end kit, and might let me do some measuring. Any other ideas/specs?