Quote:
Originally posted by CheeseBall
So if I do go w/ a no spring mount, how much do I still have to worry about the amount of force the tubing is putting on the block one way or another?
|
Wouldn't worry to much. The bolts themselfs will do most of the support. It you pull down on the tubbing the top 2 nuts and bolts will take most of the force. Just make sure you don't over tighten the nuts and try your best to keep them level.
I never had a problem before. I have put a lot of pressure on the block from side force. Even picked the mobo up by the block and swung it around before (wouldn't recommend doing this with hardware you might still use) and the block didn't budge.