Pro/Forums - View Single Post - The "Cascade" - mini-cup directed jet-impingement block design (56K warn)

Cathar · 06-05-2003, 12:49 AM

Has a few issues with the holes not being drilled cleanly. I've talked with the machinists on this and will be getting a new plate made up using a different material and revised machining procedure that should fix the issues. Have plugged it in though and on the first go is achieving ~1.5C better than the WW, even with the clogged nozzles. Gotta head off to grab a drill bit and clear up the swarf binding issues with the holes on this one and will retry.

Anyways, here's the happy snaps of Rev 2.

06-05-2003, 12:49 AM	#125
Cathar Thermophile Join Date: Sep 2002 Location: Melbourne, Australia Posts: 2,538	Rev 2 has arrived Has a few issues with the holes not being drilled cleanly. I've talked with the machinists on this and will be getting a new plate made up using a different material and revised machining procedure that should fix the issues. Have plugged it in though and on the first go is achieving ~1.5C better than the WW, even with the clogged nozzles. Gotta head off to grab a drill bit and clear up the swarf binding issues with the holes on this one and will retry. Anyways, here's the happy snaps of Rev 2.