[JokerCPoC]

Nice, Doesn't even begin to cover this creation, That's fantastic! I wish mine would look half as good as this one when I get all the parts and get It working.
Wow!
right now I only have a few parts:

MaxXxpert Radiator 3/8" connectors $30.00 @ ebay, Free shipping.
D-Tek Drive Bay Reservoir 3/8" connectors $25.00 @ www.case-mod.com/
10' of 1/2" OD 3/8" ID Clear Vinyl Tubing $5.00? H&E Hardware
12 Hose clamps $1.00? H&E Hardware

My Shopping List is like this:
1. 120mm*120mm*38mm thick fan (cheap) to use as a shroud (I know It's a waste of a good fan, But, It's Ouick),
2. UNI BF-1 Bulk Filter Foam - Green Fine Foam. Size: 12" x 16" x 5/8" thick (Needs Support from a Fan Grill) $??.00,
3. 90 degree duct (1.75"x6"x5") and a hole in bottom of My case,
4. PCI Relay card $28.00,
5. Eheim 1048 pump $80.69,
6. Gemini Cool Water Blocks (Cpu, Gpu, NB & SB) about $120.00 or so.

My Radiator is in the front of the case so It will dump inside the case, Which since I have Pyramid V Temperature controlled fans (3-120mm and 1-80mm) possibly means I need a better case or I need to vent (Duct Tube or Box Vent? That might work.. If I can keep It short.) the warmed up air out the bottom of this small (17"x17"x7" or 425mm*425mm*175mm Internal dimensions of My) case.

7" length for Duct+Fan+Shroud+Radiator.

Edit: I may need a new case anyway, My last 5.25" drive bay of 3 is useless for anything longer than about 6" due to the case being so short.