Well, I got the components installed on the motherboard side of of the case, and am almost done with the drive side.
It's still fairly cramped on the drive side - the case really needs to be two inches larger in all exterior dimensions to provide a reasonably comfortable fit. The cables for the drives press up against the PSU, somewhat blocking the inlet grill.
The motherboard is almost too long, in that it almost completely covers the hole that was provided by the manufacturer for drive cables and power pigtails. This means that the water tubing is going to have to go over the motherboard mounting plate. This isn't going to be a problem, but it was not part of the master plan.
My watercooling website will be updated with pics as soon as I have my computer running again.
|