View Single Post
Unread 06-14-2003, 11:06 AM   #19
JokerCPoC
Cooling Savant
 
JokerCPoC's Avatar
 
Join Date: Sep 2002
Location: Hesperia, CA
Posts: 130
Default

Well It's a tiny 200Gph pump that's about 3.0"L x 1.75"W x 2.5"H in size. It has a ceramic shaft (that's what Via's site mentioned) And with a 3/4" ID fitting and a bushing that will mate with both the fitting and a 1/4" npt thread from a Hose Barb, I should have the Inlet modded for Tubing. The Outlet comes with parts for Tubing (1/2" or 3/8"), But They are short. Yeah It took Me a bit to think this up and some silicon adhesive will be needed on the fittings.
__________________
My Blog
Joker1: 2-265 @ 2.25GHz cpus(OSA265FAA6CB)[H8DCE] soon
Joker2: 1-165 @ 2.65GHz cpu[Bios/Clockgen405], MS-6702E v1.0(9.3 Bios)
Joker3: 1-270 @ 2.40(2nd-270 cpu soon)GHz cpu[Ntune], K8N-DL v1.03(1007 Bios)
Joker4: 2-285 @ 3.25? GHz cpu[Ntune], (soon) K8N-DL v1.03(1007 Bios)
Joker5: 2-285 @ 3.25? GHz cpu[Ntune], (soon) K8N-DL v1.03(1007 Bios)
(10.10GHz now, 25.43GHz maybe? Crunchin 4 SetiBoinc for the PC Perspective Killer Frogs)
JokerCPoC is offline   Reply With Quote