View Single Post
Unread 06-15-2003, 05:00 AM   #8
phill9700
Cooling Savant
 
phill9700's Avatar
 
Join Date: Apr 2003
Location: Northam, South West Of England
Posts: 155
i'll b e on the look out

well my sig is farily old, but i havent lost any cpu's at all yet...
the other two setups i have got running now are using i believe default voltage.. 1.5 or they might be slightly higher, 1.55v, mine is now set to about 1.65v and is doing 190 x 12... it used to be set to 12.5 x 190, but for some stupid reason, it dont want to know anymore... but i had to set that to 1.725v which is what you said a limit would be at.. oh well, its only pocket change at the end of the day
well i have tried lower multiplers and higher fsb's, but i still get the same problems, it just dont work.. my board wont do 200fsb, either or the epoxs will, they just dont want to know.. (although i will try the newer model at some point today and i will post again and let you know)
well i have bought three of these things now and i still have three in fully working order, so i cant be doing to bad!
i will test the three boards with the cosair memory (just one dimm in each) and see where and what it can or cant do.. thanks for the help..
__________________
NF7-S Rev 2
XP1700 @ 2.45ghz (11.5x213fsb) @ 1.8vcore (bios setting)
Memory timings at cas 2 2-2-6 @ 2.7Vdimm (memory divider set to 3/3)
IBM Deskstar 80gig ata100 hard drive
Pioneer dvd-rom/dvd-rw
Xaser 2 case modded with 120mm side fan
Thermalright SLK-900U + 92mmm Tornado fan
Vantec 205SL Fan controller (controlling the 120mm fan and Tornado)
Enermax 460W PSU
Geforce 3 Ti 200 64mb
phill9700 is offline   Reply With Quote