Haha here am I.
Well here are the facts.
Draw your own conclusions. First I must ask show me someone with a Dtek Rad on this forum that UV Dye stays longer than 2 or 3 weeks. If such person exist then Question: Is your Dtek Rad the one with screw in Barbs, mine was.
The Facts:
First let me say that I have tried 2 different Rad from Dtek and same thing with both!!!
I start with a clean system everything running awesome, then add some UV Green Dye from Dtek and everything is glowing great. 24 hours later UV color is fading fast. Day 2 water is clear again. Thats the facts.
So I start with a clean system AGAIN. This time No Dtek Rad in loop. Add same UV green Dtek Dye and for 3 days it glows strong NO problems. Im actually running my system with no Rad. Then I add the Dtek Rad and what do you know within 24 hours UV Dye is getting weaker. The the next day water is clear. IT IS THE RAD.
BOTH times I took Rad off my system after UV Dye is gone and emptied the Rad into the sink and guess what came out at bottom of Rad, my UV Dye. It was stuck at the bottom tank of Rad.
Thats the facts make your own conclusion, or better yet go buy one and prove me wrong. At least report back.
Then I bought a AquaCoil II and guess what NO problems at all. UV Dye just as strong as ever.
Joe also reports his BIX works fine for 2 years with UV Dye.
OH and by the way with the AquaCoil II I see No little silver floaties in tubing, which I believe it was solder from the Dtek Rad.
__________________
NF7-S Bios D1.8 218FSB X 11.5
1700+ DLT3C 0310 @ 2511Mhz
TwinMos 2x256 PC3200 BH-5
Albatron TI4800se 310/643
3dmark 15,110
3DMark2001SE Link
|