[Sproket]

Actually my AquaCoil II has a bent U tube near one of the barbs, thus slowing down the flow a little. I bought it used like this.
Water still flows faster through this than a dtek rad. My temps are 3 degree higher than Dtek Rad but I dont have a UV Dye problem anymore. To me it worth the 3 degree temp rise.

I have a 1048 pump and my temps are at 98F idle and 105F Load w/ whitewater block.

Im putting a second L1A fan on there and will lower temps back to normal, same as when I had Dtek rad.