Thread: Slowing down?
View Single Post
Unread 06-21-2003, 10:18 AM   #1
phill9700
Cooling Savant
 
phill9700's Avatar
 
Join Date: Apr 2003
Location: Northam, South West Of England
Posts: 155
Default Slowing down?

im having some 'weird' problems with regards to my cpu..
before when i first had the cpu and the motherboard, i found the limit of the fsb at 192, so i backed down to 190 to be safe. i was using the highest multiplier at the time, 12.5 (im using an epox 8rda+ board) and the speed was good at 2375Mhz or 2.39ghz..
recently i have been having problems with running it at even 12 x 190, so now im having to back down to 11.5 x 190 and as the fsb of the board is at its limit, i dont really want to push it further..
does anyone know whats happening with my cpu? is it dieing or something?
it used to work at about 1.65V @ 12.5 x 190, now its just managing to work at 11.5 x 12 @ 1.6V. even when i push it to 12 x 190 @ 1.7V, it wont finish 3dmark 2001se's default test, it crashes doing the theroy tests... i think its the first one after the nature test that it just stops...
please can someone tell me what the heck is going on? will i need a new cpu?
__________________
NF7-S Rev 2
XP1700 @ 2.45ghz (11.5x213fsb) @ 1.8vcore (bios setting)
Memory timings at cas 2 2-2-6 @ 2.7Vdimm (memory divider set to 3/3)
IBM Deskstar 80gig ata100 hard drive
Pioneer dvd-rom/dvd-rw
Xaser 2 case modded with 120mm side fan
Thermalright SLK-900U + 92mmm Tornado fan
Vantec 205SL Fan controller (controlling the 120mm fan and Tornado)
Enermax 460W PSU
Geforce 3 Ti 200 64mb
phill9700 is offline   Reply With Quote