Quote:
Originally posted by nyyanks
The 3/8 thread my be as big as the 1/2 id but its not possible for the id of a 3/8 fitting to be 1/2 inch, its 3/8.The od of the thread does not translate to the size of the hole through it.3/8 means that the size of the hole is 3/8 which is not ,as far as I know as big as 1/2 inch.
|
The 1250 comes with two output fittings. One for hose and one that has a smooth cup. Since my system is running right now I can't measure the hose fitting but I can measure the second fitting. The ID of the threaded side of the fitting is 1/2" the cup is 3/4". If you go to
http://www.dtekcustoms.com/product.asp?3=64 you see the parts I am talking about. They have G 3/8" next to them which only adds to the confusion.
Thanks,
...Rich