Pro/Forums - View Single Post

leejsmith · 06-24-2003, 06:08 AM

my joystick temp software is working very nice. I found the readings woudl fluctuate a lot so i added changed the program to take 30 readings every second and pass the average temps to the program. this way i get very stable readngs wich also helps with calibraton.

here is a sample graph i produced from one of my cup blocks againts the maze 3. both are delta temps cpu - air temps.
(note this is not actual core temps but a thermster stuck to the bottom of the cpu)

Orded some better thermisters that have have a tolerance between temps 0C and 70C of +-0.2C.

once i have removed all the little glitches if anyone wants it just drop me a PM. Also if there is anything anyone thinks could be a usefull feature i could add them too.

I have a 20x4 lcd in my pc and plan to display the 4 temp readings on that direct from the program. It could also pass them to MBM5 shared memory.

06-24-2003, 06:08 AM	#278
leejsmith Cooling Savant Join Date: Mar 2003 Location: notts uk Posts: 408	my joystick temp software is working very nice. I found the readings woudl fluctuate a lot so i added changed the program to take 30 readings every second and pass the average temps to the program. this way i get very stable readngs wich also helps with calibraton. here is a sample graph i produced from one of my cup blocks againts the maze 3. both are delta temps cpu - air temps. (note this is not actual core temps but a thermster stuck to the bottom of the cpu) Orded some better thermisters that have have a tolerance between temps 0C and 70C of +-0.2C. once i have removed all the little glitches if anyone wants it just drop me a PM. Also if there is anything anyone thinks could be a usefull feature i could add them too. I have a 20x4 lcd in my pc and plan to display the 4 temp readings on that direct from the program. It could also pass them to MBM5 shared memory. Last edited by leejsmith; 06-24-2003 at 06:15 AM.