View Single Post
Unread 06-24-2003, 01:24 PM   #5
jaydee
Put up or Shut Up
 
jaydee's Avatar
 
Join Date: Dec 2001
Location: Spokane WA
Posts: 6,506
Default

Quote:
Originally posted by bigben2k
Ok, before you get slammed by JayDee...

LOL.

Lets see 66F = 18.88888889C. So realisticaly with the top of the line equipment and everything setup very well your looking at about 38C Full Load with just the CPU WB. Your current temps are wrong. Prove they are right before insisting they are.

Your going to loose a lot of flow rate with all that added stuff such as the hard drive blocks and the North bridge and GPU. The CPU will run a little warmer than the old but not by much. The biggest added heat producer will be that GPU. Those things are getting up to 50-70C under load these days. So with the lower flow rates and the added heat load expect the temps to rise some even with one less CPU.

Being you don't know your real temps then the question is really pointless to try and answer anyway.
jaydee is offline   Reply With Quote