Quote:
Originally posted by satanicoo
Still this makes me think that direct-die can be much, much better then normal wb.
There's always the problem of it lasting litle, i know...
|
If I were to do it I would do it like mentioned in the Cascade thread. Drill holes through the base of the block and make jets aimed right at the holes so the inpengment is right on the core of the CPU Die itself. That would rule ass, but I am not sure the base would hold up under pressure without collapsing as the base would have to be pretty thin to get the maximum impengment effect. With holes in a thin base with 25lbs or so of mounting pressure you can do the math.... Then there is that sealing issue. If they didn't put any of those blasted little electronic parts ontop of the CPU you could get around the colapsing issue by making a foundation on the top of the CPU. Bah! To much work....
