If you haven't yet check out the PSU Update on my site. Its worth noting that my psu is working fine and not even warm now, BUT it is not being loaded much at all in my system. I would not recommend running any Tecs or items that suck lots of amps from it however.
My cooling solution for the Enermax works, and is a multitude of things that I have done over time to solve all the hot parts I could find. Even since that update article on my site, (when recently modding the block for 8mm fetso from the previous 6mm), I noticed that the large white ceramic resistor near the transformer was obviously getting hot by discolouration of the base of the copper block. I have since thermal epoxied the resistor to a copper plate that is connected to the block in a similar fashion to the coil cooling bracket.
|