Quote:
Originally posted by bigben2k
Tell me again where you tap into the mobo?
|
Heh, ya that. Not for the faint of heart.
Current sense shunts (resistors of a few milliOhms) need to be placed in series with the CPU voltage regulator's inductors. You'll need to unsolder the inductors, and solder the shunts to them, with sense wires coming off each end of each shunt. Depending on the available space, you may need to wind new wire around the torroidal cores to get long enough leads. Solder the combined units back in, with the shunt on the CPU of the coil.