Quote:
Originally posted by jaydee116
Went over everything again. Reseated everything and added a better fan the HS. Was using a 15CFM 60mm above now have a 38CFM on there.
Here is what I got: (24C room temp)
XP1600+ 1400mhz 1.75V bone stock ECS K7S5A.
Bios Idle:
Onboard 39C
TC 49C
WinME Idle:
Onboard 39C
TC 49C
Running SETI:
Onboard 41C
TC 53C
XP1600+ 1540mhz 146FSB 1.75V Using SetFSB (http://www.vector.co.jp/soft/win95/h.../se239139.html) in Windows.
Onboard 43C
TC 57C
|
Now I am real freaked out. I dropped on my Mini Channel block showed below. Now the temps have wildly changed and I don't mean overall temp wise, I mean consistancy wise.
Now under a load the TC reads 41C and MBprobe (not MBM as used above) reads 44C!!! The onboard is warmer then the TC. Only thing that changed is the water cooling setup replaced the air cooler! :shrug:
