Pro/Forums - View Single Post - BIX 2 in Lian Li PC-62

pakman · 07-06-2003, 05:02 PM

This is how close the BIX gets to the PSU in my setting in a Lian-Li PC-7 mid tower. this is a pic of my BIX, but the BIX2 sits in the same area (obviously extends further to the front of the case). I had to re-route the PSU cable out the bottom as there is no clearance between the back of the PSU and the BIX2. Now since you have an extra 10cm on the PC-62, this probably won't be needed. All you need to do is dremel or holesaw 2 12cm holes up top and drill holes for the fans!

07-06-2003, 05:02 PM	#6
pakman Cooling Neophyte Join Date: Jul 2003 Location: WA State Posts: 76	This is how close the BIX gets to the PSU in my setting in a Lian-Li PC-7 mid tower. this is a pic of my BIX, but the BIX2 sits in the same area (obviously extends further to the front of the case). I had to re-route the PSU cable out the bottom as there is no clearance between the back of the PSU and the BIX2. Now since you have an extra 10cm on the PC-62, this probably won't be needed. All you need to do is dremel or holesaw 2 12cm holes up top and drill holes for the fans! Last edited by pakman; 07-06-2003 at 05:07 PM.