[bowman1964]

ok guys i need some imput on this.

i have a 172 watt pelt that i use to make heat for a load block for testing evaperators.
now i know right now i have 13.4v x 6.0 amps =80.4watts now add the heat made during this process you get 13.4v x 6.0a x 1.4 now this = 112.56 watts. but it has a water cooled cold side to give more heat to the block but it is too hard to caculate the total heat output excaty.

now i have 2 brand new 130 watt peltiers laying around also.
what would be the best way to make large amounts of heat and me able to get a precise heat output.

i thought of using the 2 130's in a side by side plate and just let the cold side reach 0 dt and then i can just caculate volts x amps.

or what if i run them stacked would that be better.
stacking them i think? will work with lets say 13.4v x 6.0a x 1.4 + the 13.4 x 6.0a of the second one giving me a totel of 192.96 watts I THINK?

any ways any ideas?

ok tell me some ideas on how to set these up to get a fixed heat output .

thanks