I did pretty good this weekend. That P4 system I mentioned before is running good now (and I figured out why it was reading stupid-high temps. Problem with MBM config, not with the processor). Also late last week we finally got our second CPU's for our two tech-servers here at work (we have two now-dual 2.8Ghz P4's for me and 5 other guys here at work to test stuff on, develop on, and generally screw around with) so I had those folding over this last weekend. I've also been tweaking with my 2500+ - got the watercooler on it and started to play with the clocks. It did 11x200 @ 1.7V running staying within a degree or two of 40C as ambient fluctuated (down from around 66C running stock speed/voltage with the OEM HSF), and I'm playing with it now at 11.5x200 @ 1.75V, still rock stable. I haven't been able to find much info on the average OC attainable on the FSB for the A7N8X Rev 2.0's, but I had it crash on me at 210FSB after 30 mins in BF1942, so I think I'm near the max there. But I've got a lot more voltage options still available to me and I'm hoping to get at least another 100Mhz out of it before Wednesday. So for the weekend I had a 2300Mhz Barton running most of the time, a P4 @ about 2.6 msot of the time, my work P3 866 slowly chugging along, and 4 P4 2.8's so they would have something to do while I had the weekend off.
But on Wednesday everyone else gets to catch up to all the distance I made on the weekend. My comp as well as the P4 2.6 are getting packed up and hauled off to Fragapalooza and will be there till next Monday again. And as I won't be at work I won't be telling any of the ones there to fold for me. So all that will be left is that 866, slowly chugging away at my desk.
I'm kinda hoping though that I can use those 4 P4 2.8's pretty much every weekend, and try and keep my standing fairly close to the top. And come Christmas when we close for two weeks I get to put all the servers into folding mode and make a run for the top spot.
|