Quote:
Originally posted by Cathar
Actually the blower is pretty quiet for the air-flow/pressure it's generating. At the second lowest speed setting it's pushing about as much air through my radiators as 2 x 104CFM Panaflo H1A fans did at full speed, and I can barely hear the blower at all. The 8cm medium speed case fan I have blowing air over the CPU area is the dominating noise in my setup, at least until the CD drive spins up and that is far louder than anything else.
Blower noise is far more tolerable than axial fan noise when pushed up higher. Blower's don't whine like axial fans. Forgive me for going on about the blower, it's just that I'm pretty happy with it after years of never being happy with axial fans. It's the best fan investement I've ever made.
As for the heater-core pictures. The fin area is 22cm x 14cm x 3.2cm
|
hehehe, to work with blowers is really something exciting when fans is had by the whole part, I already tested some but I didn't have the luck to find one that if it adapted my nessecidades and size x potency, your post it motivated me to continue seeking
from where they had left your blowers, it will be very difficult achal-them in the brasil, because I already sought plenty, but....
with relationship to your rads are a lot similar to the one of F1 (seemed this far away from me to affirm that are similar in efficiency, me that I swimed in the middle of rads I know what small differences do in acting)
I only am not right of the material used in that rad, could it clear me?