Quote:
Originally posted by Blackeagle
The Quiet One I found with a draw rate close to your stated draw.
Free flow 1040gph
Flow @ 6' of head 600gph
Watts draw of 85 watts
Max head rate wasn't stated, but the above shows it wouldn't be more than about 10.5'
|
That also bestirs me and a lot, somewhere to a mistake, doesn't care mine or of other, but it would like of you find it, that is the objective
What finds strange it is to obtain a rate with that equipment that is also impossible according to the measures of the review of the tc4, and I have just made the tests with that system
I tested here only to remove one doubts two your calculations, I used a bomb of 30w 1,5 meters of tubes of 1\2, a new rad that I am doing of 6 " x 6 " of measures, and logical, much more restrictive than F2 and a block tc4, obtained 10.9 liters per minute in the end circuit.
as I think the tc4 requests something as 3m pressure drops at 10lpm
To something wrong somewhere, because that horrible bomb that used of 30w could not also make that
and now friend?
my model
model 40R175254V
MAX-FLOW (GPH) 1140
horse power 1/25 HP
WATTS 87w
SHUT-OFF PRESSURE 6.5 psi
Shut Off Heat Ft 15,5
GPM 19
L/M 72.2
GPH 1140
L/H 4332