BB2k where is this graph that cathar made?
what lee has been saying it all good. you want to calculate out the best heat transfer situation.
these are the dimentions for the jets that I am planning on using for my block.
Jet ID. --- 1/32" - .79375mm.
Cup width - 3/32" - 2.38125mm.
distance from jet to base of cup
1/8" to 5/32" - 3.175mm. to 3.96875mm.
I'm going for around 50 jets.
but for around 19 jets 1/16" would be the easyist(sp?)
Lee what do you mean by "the water will be sucked out"?
JayDee116- I found alot of tiny tubes at my local hobby supply store.
__________________
Epox 8RDA+ v1.1----------Tyan K8SDPro
1700+ JUIHB 0310XPMW (12.5x200Mhz@1.792v)--------2xOpteron246 (2Ghz 1MB L2)
2x256MB Kingston PC3000 (BH5?) 2-2-2-8 2.7v---2x512MB Corsair Reg.&ECC PC3200
ATi Radeon 9800Pro (stock, too hot)-----ATI RageXL
WD800JB+WD2500JB-------WD1600JD
Sony DVD/CDRW-------NEC 3520A Black
Forton350W--------Antec TruePower2.0 550W EPS12v
|