Pro/Forums - View Single Post

jtroutma · 09-21-2001, 11:49 PM

Well the whole reason why I wanted 48V pelts was because I wanted to get a 48W powersupply to run these suckers instead of a 12V powersupply.

My idea for a chiller will require about (4) 156W pelts and I would much rather use a 48V setup becuase of lower amperage in the system. 24V pelts will also work (2 parrallel sets of two 24V pelts running in series).

Running the pelts @ 20V might be plausable however it would be more difficult to control the current.

Oh well it was an idea.....

09-21-2001, 11:49 PM	#11
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	Well the whole reason why I wanted 48V pelts was because I wanted to get a 48W powersupply to run these suckers instead of a 12V powersupply. My idea for a chiller will require about (4) 156W pelts and I would much rather use a 48V setup becuase of lower amperage in the system. 24V pelts will also work (2 parrallel sets of two 24V pelts running in series). Running the pelts @ 20V might be plausable however it would be more difficult to control the current. Oh well it was an idea..... __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250