Pro/Forums - View Single Post

GenGoku · 07-26-2003, 02:34 AM

this is a little strange. the blow hole is now pushing out noticeably warm air. also the PSU is a lot hotter. maybe it's just something i never noticed before.

temps getting pretty warm at 114F (MBM5) & 107.7F (Enermax), idle at 2.0GHz. the eheim 1250 is pretty warm to the touch too

[edit]
ROFL, maybe because i had prime95 torture test running in the background

stopped: 45min, 0 errors, 0 warnings. MBM5-113F, Enermax-107.4F

[edit2]
50min later, idle temps
mbm5 - 102F
Enermax - 96.2F
room temp - 79.8F

(room feels a lot colder than 79.8F. I have a box fan pulling in cold air)

07-26-2003, 02:34 AM	#10
GenGoku Cooling Savant Join Date: Apr 2002 Location: Southern California Posts: 177	this is a little strange. the blow hole is now pushing out noticeably warm air. also the PSU is a lot hotter. maybe it's just something i never noticed before. temps getting pretty warm at 114F (MBM5) & 107.7F (Enermax), idle at 2.0GHz. the eheim 1250 is pretty warm to the touch too [edit] ROFL, maybe because i had prime95 torture test running in the background stopped: 45min, 0 errors, 0 warnings. MBM5-113F, Enermax-107.4F [edit2] 50min later, idle temps mbm5 - 102F Enermax - 96.2F room temp - 79.8F (room feels a lot colder than 79.8F. I have a box fan pulling in cold air) __________________ Lian Li PC65 / Enermax Thermal Monitor + Rheobus Fioneer 4x DVD-RW (Cendyne) Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series) AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual) GeForce 4 Ti4200 128MB 512MB DDR PC3200 HyperX 512MB DDR PC3200 TwinX (2x256) Abit NF7-S v2.0 Samsung SyncMaster 900NF Powered by Water Last edited by GenGoku; 07-26-2003 at 03:28 AM.