Quote:
Originally posted by LeadSalad
Alright, I'm assembling my first watercooling system and I'm not yet sure where to gather parts. I like Scompracer's submarine air breather idea but I don't know where to get the cup and seals. And I like Turbokeu's clear plexiglass/pvc res and I'd like to know where he got the plexiglass and endcaps from. I'd also like to know where to get brass barbs or polyurethane barbs from if any hardware stores carry them, otherwise I'll resort to ordering them online.
|
1) You can get them at a Home Depot, Lowes, ACE-Hardware store, or just about ANY plumbing supplier... Or you can go the REAL cheap way that I do, and hop on your bike etc, and venture down to the nearest construction site or scrap yard and there will be just about everything that you need! Or a Walmart, Meijer, and just modify one of them clear food storage containers (Actually, DAMN IT! I should have done that 1st, before all this PVC modding and lucite windows
)
2)Again Brass/nylon barbs etc... can be found at any plumbing supplier, but they don't come cheap there! So I would stick with a general hardware store.... Good luck
__________________
XP 1600+ AGOIA-Y (GreenLabel, UNLOCKED!@/ NF7-S 2.0/ PC 2700 DDR
10.5*172FSB(1806/ 1991 high), Vcore 1.792...@84.95Watts
--86' Chevette Heater Core
--1/2" Vinyl tubes
--Via1300-Stealth Mod(QUIET!)
---Home made copper-tube block
---PVC small internal res