Pro/Forums - View Single Post - Need assistance. About to dump MCW50-T

Thank you.

I decided to go the non-peltier route for the time being. Any suggestions on the best VGA water block?

Swiftech MCW50 (without the T)

DD

D-Tek

thank you again

__________________
MY RIG WEBSITE-BROADBAND RECOMMENDED
MAIN COMPUTER-2564 MHZ!!!
2800 Barton * 2564 stable, 2.0 volts, 44 under load, 2500 Barton AQUCA-0306-Stable at 11x232=2552 mhz) ,43 degrees under a load, 2.025 volts, VDD 1.84, Iceberq4 on NB, Iceberq on SB, Thermaltake Xaser III V2000A Thermaltake (550w peak), ATI 9800 PRO o/c 490/396(792mhz memory) w/Zalman cooler & fan, Epox EP-8RDA+ C1 Stepping,19" Viewsonic VX-900 LCD, Geil PC3700 2*256 megs Platinum 466mhz * 4-3-3-2.5/2.90v. D-Teck TC-4, 1/2" lines, 1300 WP, ProRadiator Combo/Shroud/Enermax 120mm fan.
Coming Soon: SwiftTek MCW50-T VGA Thermalelectric VGA Cooler
3DMARK2001-21167,3DMARK2003-7018, Sandra Memory-3543/3314

07-28-2003, 08:57 AM	#3
GS400MAN Cooling Neophyte Join Date: Jun 2003 Location: Fontana,CA Posts: 3	Thank you. I decided to go the non-peltier route for the time being. Any suggestions on the best VGA water block? Swiftech MCW50 (without the T) DD D-Tek thank you again __________________ MY RIG WEBSITE-BROADBAND RECOMMENDED MAIN COMPUTER-2564 MHZ!!! 2800 Barton * 2564 stable, 2.0 volts, 44 under load, 2500 Barton AQUCA-0306-Stable at 11x232=2552 mhz) ,43 degrees under a load, 2.025 volts, VDD 1.84, Iceberq4 on NB, Iceberq on SB, Thermaltake Xaser III V2000A Thermaltake (550w peak), ATI 9800 PRO o/c 490/396(792mhz memory) w/Zalman cooler & fan, Epox EP-8RDA+ C1 Stepping,19" Viewsonic VX-900 LCD, Geil PC3700 2256 megs Platinum 466mhz 4-3-3-2.5/2.90v. D-Teck TC-4, 1/2" lines, 1300 WP, ProRadiator Combo/Shroud/Enermax 120mm fan. Coming Soon: SwiftTek MCW50-T VGA Thermalelectric VGA Cooler 3DMARK2001-21167,3DMARK2003-7018, Sandra Memory-3543/3314