Quote:
Originally posted by Cathar
I'm not sure for the reason of the difference that copyman is seeing.
In my system I have 2 heater-cores in series, a sponge filter, two sweeped elbows, and about 4m of 1/2" ID tubing.
With the Iwaki MD-30RZ in my system the difference is 10.5-11.0lpm with the White Water and 10.0lpm with the Cascade.
With the Eheim 1250 I see 6.0lpm with the White Water, and 5.5lpm with the Cascade.
I'm using a regular Cascade as it would ship to people. No difference whatsoever.
The earlier Cascade prototypes had less tubes and larger jets, and were less restrictive than the White Water. With the shipping block that has changed slightly, but I kept a careful eye on the flow rate resistance so that this would not be an issue.
|
Interesting cathar, will take advantage of that will test other bomb of 1200gph 19 " shut off in the weekend and I will measure again, I still have here 3 cascades to play.
It is possible that it was obstructed in the test, but it was not more or final because I checked before
I am sad for not having to who to send my rads and your block cascade to evaluate at a laboratory that can supply necessary data.
I am with a ready complete group, rad, bomb, lrww, cascade and tubes for sending.
but for who?
bill doesn't execute more the tests, joe not this ready one executes it them, I am the wait so that my equipment can be tested in a complete kit with the cascade and lrww, and only the rad.
what sent for you it doesn't have that purpose, just for you to see if it likes... F2 Extreme it should take two weeks to arrive for you
As soon as possible I will send the models dual fan if you want
[]'s