hmm, after thinking about it for a day, you might get it to work, you would have to use a trapazoidal spacer between the chip and the pelts, the small end matches the chip and the big side matches the pelts, you would also need massive insulation to reduce wasted energy, but it might actually work. It would be more reliable than cascading but would only cool to the same level as one of them. Basically all of them have a lowest possible temp, since the cold side of all of them would be the same temp the chip would only get that cool, but then on the reverside, much more heat could be pulled off.
in a nutshell I will just compare the two methods:
cascading - colder cold side but with hotter hot side
Kev's idea - greatly increased heat removal but will only get so cold.
hmm, makes me wonder now, someone will have to try this out, but making a trapazoidal spacer might be a tad difficul, especially making one that will fit.
well, that's my days worth of thought's on this, damn you for making me think about this all day
with care,
Cryo
[This message has been edited by Cryonosis (edited 11-28-2000).]
[This message has been edited by Cryonosis (edited 11-28-2000).]