Pro/Forums - View Single Post

phill9700 · 08-04-2003, 07:05 AM

that sounds great, but what motherboard should i use or get? my epox boards i have (8rda+ and the 8rda3+) seem to be rather limited when overclocking...
for example, my 8rda+ wont go above 11 x 190 and my8rda3+ wont go above 10 x 200 (and thats at a push)...
please help!!
i have tried searching for this DFI Lan Party Motherboard that Amandtech reviewed and said it was the best AMD board about, but i live in the UK and i cant find it anywhere

any ideas?

08-04-2003, 07:05 AM	#3
phill9700 Cooling Savant Join Date: Apr 2003 Location: Northam, South West Of England Posts: 155	but which motherboard to go with the barton? that sounds great, but what motherboard should i use or get? my epox boards i have (8rda+ and the 8rda3+) seem to be rather limited when overclocking... for example, my 8rda+ wont go above 11 x 190 and my8rda3+ wont go above 10 x 200 (and thats at a push)... please help!! i have tried searching for this DFI Lan Party Motherboard that Amandtech reviewed and said it was the best AMD board about, but i live in the UK and i cant find it anywhere any ideas? __________________ NF7-S Rev 2 XP1700 @ 2.45ghz (11.5x213fsb) @ 1.8vcore (bios setting) Memory timings at cas 2 2-2-6 @ 2.7Vdimm (memory divider set to 3/3) IBM Deskstar 80gig ata100 hard drive Pioneer dvd-rom/dvd-rw Xaser 2 case modded with 120mm side fan Thermalright SLK-900U + 92mmm Tornado fan Vantec 205SL Fan controller (controlling the 120mm fan and Tornado) Enermax 460W PSU Geforce 3 Ti 200 64mb