Pro/Forums - View Single Post

BrianW · 08-05-2003, 02:49 AM

Hello all,

I am revisiting using a cube case for a project. I am asking a big favor.

I want to know the following dimensions:

Inside Heighth of the Right (Drive) chamber : (I know from the above responses that is approx 13.5", but would like another measurement)

Inside heighth of the Left (Mobo) chamber: (I assume same as the drive chamber, but would still like confirmation)

Inside depth of Mobo chamber (from front metal, to rear metal):

Inside depth of Drive chamber (from approx. back of drive, to the rear metal):

Width of Drive chamber:

Width of Mobo chamber:

Thanks,

BrianW

08-05-2003, 02:49 AM	#5
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	BUMP Hello all, I am revisiting using a cube case for a project. I am asking a big favor. I want to know the following dimensions: Inside Heighth of the Right (Drive) chamber : (I know from the above responses that is approx 13.5", but would like another measurement) Inside heighth of the Left (Mobo) chamber: (I assume same as the drive chamber, but would still like confirmation) Inside depth of Mobo chamber (from front metal, to rear metal): Inside depth of Drive chamber (from approx. back of drive, to the rear metal): Width of Drive chamber: Width of Mobo chamber: Thanks, BrianW __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)