The original barbs listed on my heater core above is listed as 5/8". After cutting them down past the flanges, you will have a pipe size that will accept a 1/2" Pipe to 1/2" female threaded NPT fitting showed in the pics I posted above. The T piece above also fits over it perfectly. Both will have a little play, but nothing some flux, and some silver solder wont fill. So basically any fitting that on one side accepts 1/2" pipe will work.
Hope it helps,
BrianW
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose).
Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently.
Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)
|