Be careful when using a hair dryer...
Be careful when using a hair dryer...
I have actually blown components off of boards with over enthusiastic use of a hair drier on high heat... (fortuneately it was a disposable item...)
Stick with low or medium heat, it's safer. Keep a good distance (18" or more) from the board, you just want to warm things up, not fry them.
Keep a hand in the airflow - if it's to hot for your hand, it may be to hot for the board....
Good luck,
Gooserider.
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c
|