Pheonix it may very well be necessary to take your warecooling rig apart. You may develop biological growth, or you may need to relocate an item in your loop.
You should be more specific as to what you want to seal. If you are talking about tubes, nipples, and waterblocks, you do not need to seal. If you are talking about NPT thread to thread connections you do not need to seal, but you can use teflon tape to lubricate the mating, nad get a deeper penetration. (Sounds rather kinky...)
BrianW
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose).
Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently.
Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)
|